Code Like a Pythonista: Idiomatic Python (Crunchy Remix)

January 9, 2008
Omaha Python Users Group
Presented by: Jeff Hinrichs


In the tutorial David presented at PyCon 2006 (called Text & Data Processing), he was surprised at the reaction to some techniques he used that he had thought were common knowledge. But many of the attendees were unaware of these tools that experienced Python programmers use without thinking.

Many of you will have seen some of these techniques and idioms before. Hopefully you'll learn a few techniques that you haven't seen before and maybe something new about the ones you have already seen.

The Zen of Python (1)

These are the guiding principles of Python, but are open to interpretation. A sense of humor is required for their proper interpretation.

If you're using a programming language named after a sketch comedy troupe, you had better have a sense of humor.

Beautiful is better than ugly.
Explicit is better than implicit.
Simple is better than complex.
Complex is better than complicated.
Flat is better than nested.
Sparse is better than dense.
Readability counts.
Special cases aren't special enough to break the rules.
Although practicality beats purity.
Errors should never pass silently.
Unless explicitly silenced.


The Zen of Python (2)

In the face of ambiguity, refuse the temptation to guess.
There should be one—and preferably only one—obvious way to do it.
Although that way may not be obvious at first unless you're Dutch.
Now is better than never.
Although never is often better than right now.
If the implementation is hard to explain, it's a bad idea.
If the implementation is easy to explain, it may be a good idea.
Namespaces are one honking great idea—let's do more of those!

Tim Peters

This particular "poem" began as a kind of a joke, but it really embeds a lot of truth about the philosophy behind Python. The Zen of Python has been formalized in PEP 20, where the abstract reads:

Long time Pythoneer Tim Peters succinctly channels the BDFL's guiding principles for Python's design into 20 aphorisms, only 19 of which have been written down.

You can decide for yourself if you're a "Pythoneer" or a "Pythonista". The terms have somewhat different connotations.

When in doubt:

import this

Try it in a Python interactive interpreter:

>>> import this

Coding Style: Readability Counts

Programs must be written for people to read, and only incidentally for machines to execute.

—Abelson & Sussman, Structure and Interpretation of Computer Programs

Try to make your programs easy to read and obvious.

PEP 8: Style Guide for Python Code

Worthwhile reading:

PEP = Python Enhancement Proposal

A PEP is a design document providing information to the Python community, or describing a new feature for Python or its processes or environment.

The Python community has its own standards for what source code should look like, codified in PEP 8. These standards are different from those of other communities, like C, C++, C#, Java, VisualBasic, etc.

Because indentation and whitespace are so important in Python, the Style Guide for Python Code approaches a standard. It would be wise to adhere to the guide! Most open-source projects and (hopefully) in-house projects follow the style guide quite closely.

Whitespace 1

Whitespace 2

def make_squares(key, value=0):
    """Return a dictionary and a list..."""
    d = {key: value}
    l = [key, value]
    return d, l


Long Lines & Continuations

Keep lines below 80 characters in length.

Use implied line continuation inside parentheses/brackets/braces:

def __init__(self, first, second, third,
             fourth, fifth, sixth):
    output = (first + second + third
              + fourth + fifth + sixth)

Use backslashes as a last resort:

VeryLong.left_hand_side \
    = even_longer.right_hand_side()
Backslashes are fragile; they must end the line they're on. If you add a space after the backslash, it won't work any more. Also, they're ugly.

Long Strings

Adjacent literal strings are concatenated by the parser:
>>> print 'o' 'n' "e"

The spaces between literals are not required, but help with readability. Any type of quoting can be used:

>>> print 't' r'\/\/' """o"""

The string prefixed with an "r" is a "raw" string. Backslashes are not evaluated as escapes in raw strings. They're useful for regular expressions and Windows filesystem paths.

Note named string objects are not concatenated:

>>> a = 'three'
>>> b = 'four'
>>> a b
  File "<stdin>", line 1
    a b
SyntaxError: invalid syntax

That's because this automatic concatenation is a feature of the Python parser/compiler, not the interpreter. You must use the "+" operator to concatenate strings at run time.

text = ('Long strings can be made up '
        'of several shorter strings.')

The parentheses allow implicit line continuation.

Multiline strings use triple quotes:

In the last example above (triple single quotes), note how the backslashes are used to escape the newlines. This eliminates extra newlines, while keeping the text and quotes nicely left-justified. The backslashes must be at the end of their lines.

Compound Statements


if foo == 'blah':


if foo == 'blah': do_something()
do_one(); do_two(); do_three()

Whitespace & indentations are useful visual indicators of the program flow. The indentation of the second "Good" line above shows the reader that something's going on, whereas the lack of indentation in "Bad" hides the "if" statement.

Multiple statements on one line are a cardinal sin. In Python, readability counts.

Docstrings & Comments

def my_fun():
    """I am the docstring"""
    pass    #I am a comment

Docstrings = How to use code

Comments = Why (rationale) & how code works

Docstrings explain how to use code, and are for the users of your code. Uses of docstrings:

  • Explain the purpose of the function even if it seems obvious to you, because it might not be obvious to someone else later on.
  • Describe the parameters expected, the return values, and any exceptions raised.
  • If the method is tightly coupled with a single caller, make some mention of the caller (though be careful as the caller might change later).

Comments explain why, and are for the maintainers of your code. Examples include notes to yourself, like:

# !!! BUG: ...

# !!! FIX: This is a hack

# ??? Why is this here?

Both of these groups include you, so write good docstrings and comments!

Docstrings are useful in interactive use (help()) and for auto-documentation systems.

False comments & docstrings are worse than none at all. So keep them up to date! When you make changes, make sure the comments & docstrings are consistent with the code, and don't contradict it.

There's an entire PEP about docstrings, PEP 257, "Docstring Conventions":

Practicality Beats Purity

A foolish consistency is the hobgoblin of little minds.

—Ralph Waldo Emerson

(hobgoblin: Something causing superstitious fear; a bogy.)

There are always exceptions. From PEP 8:

But most importantly: know when to be inconsistent -- sometimes the style guide just doesn't apply. When in doubt, use your best judgment. Look at other examples and decide what looks best. And don't hesitate to ask!

Two good reasons to break a particular rule:

  1. When applying the rule would make the code less readable, even for someone who is used to reading code that follows the rules.
  2. To be consistent with surrounding code that also breaks it (maybe for historic reasons) -- although this is also an opportunity to clean up someone else's mess (in true XP style).

... but practicality shouldn't beat purity to a pulp!

Idiom Potpourri

A selection of small, useful idioms.

Now we move on to the meat of the tutorial: lots of idioms.

We'll start with some easy ones and work our way up.

Swap Values

In other languages:

temp = a
a = b
b = temp

In Python:

b, a = a, b
Perhaps you've seen this before. But do you know how it works?

The right-hand side is unpacked into the names in the tuple on the left-hand side.

Further examples of unpacking:

>>> l =['David', 'Pythonista', '+1-514-555-1234']
>>> name, title, phone = l
>>> name
>>> title
>>> phone

Useful in loops over structured data:

l (L) above is the list we just made (David's info). So people is a list containing two items, each a 3-item list.

>>> people = [l, ['Guido', 'BDFL', 'unlisted']]
>>> for (name, title, phone) in people:
...     print name, phone
David +1-514-555-1234
Guido unlisted

Each item in people is being unpacked into the (name, title, phone) tuple.

Arbitrarily nestable (just be sure to match the structure on the left & right!):

>>> david, (gname, gtitle, gphone) = people
>>> gname
>>> gtitle
>>> gphone
>>> david
['David', 'Pythonista', '+1-514-555-1234']

More About Tuples

We saw that the comma is the tuple constructor, not the parentheses. Example:
>>> 1,

The Python interpreter shows the parentheses for clarity, and I recommend you use parentheses too:
>>> (1,)

Don't forget the comma!
>>> (1)

In a one-tuple, the trailing comma is required; in 2+-tuples, the trailing comma is optional. In 0-tuples, or empty tuples, a pair of parentheses is the shortcut syntax:
>>> ()
>>> tuple()

A common typo is to leave a comma even though you don't want a tuple. It can be easy to miss in your code:
>>> value = 1,
>>> value

So if you see a tuple where you don't expect one, look for a comma!

Interactive "_"

This is a really useful feature that surprisingly few people know.

In the interactive interpreter, whenever you evaluate an expression or call a function, the result is bound to a temporary name, _ (an underscore):

>>> 1 + 1
>>> _

_ stores the last printed expression.

When a result is None, nothing is printed, so _ doesn't change. That's convenient!

This only works in the interactive interpreter, not within a module.

It is especially useful when you're working out a problem interactively, and you want to store the result for a later step:

>>> import math
>>> math.pi / 3
>>> angle = _
>>> math.cos(angle)
>>> _

Building Strings from Substrings

Start with a list of strings:
colors = ['red', 'blue', 'green', 'yellow']
We want to join all the strings together into one large string. Especially when the number of substrings is large...

Don't do this:

result = ''
for s in colors:
    result += s

This is very inefficient.

It has terrible memory usage and performance patterns. The "summation" will compute, store, and then throw away each intermediate step.

Instead, do this:

result = ''.join(colors)

The join() string method does all the copying in one pass.

When you're only dealing with a few dozen or hundred strings, it won't make much difference. But get in the habit of building strings efficiently, because with thousands or with loops, it will make a difference.

Building Strings, Variations 1

Here are some techniques to use the join() string method.

If you want spaces between your substrings:

result = ' '.join(colors)

Or commas and spaces:

result = ', '.join(colors)

Here's a common case:

colors = ['red', 'blue', 'green', 'yellow']
print 'Choose', ', '.join(colors[:-1]), \
      'or', colors[-1]

To make a nicely grammatical sentence, we want commas between all but the last pair of values, where we want the word "or". The slice syntax does the job. The "slice until -1" ([:-1]) gives all but the last value, which we join with comma-space.

Of course, this code wouldn't work with corner cases, lists of length 0 or 1.

Choose red, blue, green or yellow

Building Strings, Variations 2

If you need to apply a function to generate the substrings:

result = ''.join(fn(i) for i in items)
This involves a generator expression, which we'll cover later.

If you need to compute the substrings incrementally, accumulate them in a list first:

items = []
items.append(item)  # many times
# items is now complete
result = ''.join(fn(i) for i in items)
We accumulate the parts in a list so that we can apply the join string method, for efficiency.

Use in where possible (1)


for key in d:
    print key
  • in is generally faster.
  • This pattern also works for items in arbitrary containers (such as lists, tuples, and sets).
  • in is also an operator (as we'll see).


for key in d.keys():
    print key
This is limited to objects with a keys() method.

Use in where possible (2)

But .keys() is necessary when mutating the dictionary:

for key in d.keys():
    d[str(key)] = d[key]
d.keys() creates a static list of the dictionary keys. Otherwise, you'll get an exception "RuntimeError: dictionary changed size during iteration".

For consistency, use key in dict, not dict.has_key():

# do this:
if key in d: something with d[key]

# not this:
if d.has_key(key): something with d[key]
This usage of in is as an operator.

Dictionary get Method

We often have to initialize dictionary entries before use:

This is the nave way to do it:
navs = {}
for (portfolio, equity, position) in data:
    if portfolio not in navs:
        navs[portfolio] = 0
    navs[portfolio] += position * prices[equity]

dict.get(key, default) removes the need for the test:

navs = {}
for (portfolio, equity, position) in data:
    navs[portfolio] = (navs.get(portfolio, 0)
                       + position * prices[equity])
Much more direct.

Dictionary setdefault Method (1)

Here we have to initialize mutable dictionary values. Each dictionary value will be a list. This is the nave way:

Initializing mutable dictionary values:

equities = {}
for (portfolio, equity) in data:
    if portfolio in equities:
        equities[portfolio] = [equity]

dict.setdefault(key, default) does the job much more efficiently:

equities = {}
for (portfolio, equity) in data:
    equities.setdefault(portfolio, []).append(

dict.setdefault() is equivalent to "get, or set & get". Or "set if necessary, then get". It's especially efficient if your dictionary key is expensive to compute or long to type.

The only problem with dict.setdefault() is that the default value is always evaluated, whether needed or not. That only matters if the default value is expensive to compute.

If the default value is expensive to compute, you may want to use the defaultdict class, which we'll cover shortly.

Dictionary setdefault Method (2)

Here we see that the setdefault dictionary method can also be used as a stand-alone statement:

setdefault can also be used as a stand-alone statement:

navs = {}
for (portfolio, equity, position) in data:
    navs.setdefault(portfolio, 0)
    navs[portfolio] += position * prices[equity]
The setdefault dictionary method returns the default value, but we ignore it here. We're taking advantage of setdefault's side effect, that it sets the dictionary value only if there is no value already.


New in Python 2.5.

defaultdict is new in Python 2.5, part of the collections module. defaultdict is identical to regular dictionaries, except for two things:

  • it takes an extra first argument: a default factory function; and
  • when a dictionary key is encountered for the first time, the default factory function is called and the result used to initialize the dictionary value.

There are two ways to get defaultdict:

  • import the collections module and reference it via the module,

    import collections
    d = collections.defaultdict(...)
  • or import the defaultdict name directly:

    from collections import defaultdict
    d = defaultdict(...)
Here's the example from earlier, where each dictionary value must be initialized to an empty list, rewritten as with defaultdict:
from collections import defaultdict

equities = defaultdict(list)
for (portfolio, equity) in data:

There's no fumbling around at all now. In this case, the default factory function is list, which returns an empty list.

This is how to get a dictionary with default values of 0: use int as a default factory function:

navs = defaultdict(int)
for (portfolio, equity, position) in data:
    navs[portfolio] += position * prices[equity]
You should be careful with defaultdict though. You cannot get KeyError exceptions from properly initialized defaultdict instances. You have to use a "key in dict" conditional if you need to check for the existence of a specific key.

Building & Splitting Dictionaries

Here's a useful technique to build a dictionary from two lists (or sequences): one list of keys, another list of values.
given = ['John', 'Eric', 'Terry', 'Michael']
family = ['Cleese', 'Idle', 'Gilliam', 'Palin']
pythons = dict(zip(given, family))
>>> pprint.pprint(pythons)
{'John': 'Cleese',
 'Michael': 'Palin',
 'Eric': 'Idle',
 'Terry': 'Gilliam'}
The reverse, of course, is trivial:
>>> pythons.keys()
['John', 'Michael', 'Eric', 'Terry']
>>> pythons.values()
['Cleese', 'Palin', 'Idle', 'Gilliam']

Note that the order of the results of .keys() and .values() is different from the order of items when constructing the dictionary. The order going in is different from the order coming out. This is because a dictionary is inherently unordered. However, the order is guaranteed to be consistent (in other words, the order of keys will correspond to the order of values), as long as the dictionary isn't changed between calls.

Testing for Truth Values

# do this:        # not this:
if x:             if x == True:
    pass              pass
It's elegant and efficient to take advantage of the intrinsic truth values (or Boolean values) of Python objects.

Testing a list:

# do this:        # not this:
if items:         if len(items) != 0:
    pass              pass

                  # and definitely not this:
                  if items != []:

Truth Values

The True and False names are built-in instances of type bool, Boolean values. Like None, there is only one instance of each.
False True
False (== 0) True (== 1)
"" (empty string) any string but "" (" ", "anything")
0, 0.0 any number but 0 (1, 0.1, -1, 3.14)
[], (), {}, set() any non-empty container ([0], (None,), [''])
None almost any object that's not explicitly False

Example of an object's truth value:

>>> class C:
...  pass
>>> o = C()
>>> bool(o)
>>> bool(C)

(Examples: execute

To control the truth value of instances of a user-defined class, use the __nonzero__ or __len__ special methods. Use __len__ if your class is a container which has a length:

class MyContainer(object):

    def __init__(self, data): = data

    def __len__(self):
        """Return my length."""
        return len(

If your class is not a container, use __nonzero__:

class MyClass(object):

    def __init__(self, value):
        self.value = value

    def __nonzero__(self):
        """Return my truth value (True or False)."""
        # This could be arbitrarily complex:
        return bool(self.value)

In Python 3.0, __nonzero__ has been renamed to __bool__ for consistency with the bool built-in type. For compatibility, add this to the class definition:

__bool__ = __nonzero__

Index & Item (1)

Here's a cute way to save some typing if you need a list of words:
>>> items = 'zero one two three'.split()
>>> print items
['zero', 'one', 'two', 'three']

Say we want to iterate over the items, and we need both the item's index and the item itself:

                  - or -
i = 0
for item in items:      for i in range(len(items)):
    print i, item               print i, items[i]
    i += 1

Index & Item (2): enumerate

The enumerate function takes a list and returns (index, item) pairs:

>>> print list(enumerate(items))
[(0, 'zero'), (1, 'one'), (2, 'two'), (3, 'three')]
We need use a list wrapper to print the result because enumerate is a lazy function: it generates one item, a pair, at a time, only when required. A for loop is one place that requires one result at a time. enumerate is an example of a generator, which we'll cover in greater detail later. print does not take one result at a time -- we want the entire result, so we have to explicitly convert the generator into a list when we print it.

Our loop becomes much simpler:

for (index, item) in enumerate(items):
    print index, item
# compare:              # compare:
index = 0               for i in range(len(items)):
for item in items:              print i, items[i]
    print index, item
    index += 1

The enumerate version is much shorter and simpler than the version on the left, and much easier to read and understand than either.

An example showing how the enumerate function actually returns an iterator (a generator is a kind of iterator):

>>> enumerate(items)
<enumerate object at 0x011EA1C0>
>>> e = enumerate(items)
(0, 'zero')
(1, 'one')
(2, 'two')
(3, 'three')
Traceback (most recent call last):
  File "<stdin>", line 1, in ?

Other languages have "variables"

In many other languages, assigning to a variable puts a value into a box.
int a = 1;

Box "a" now contains an integer 1.

Assigning another value to the same variable replaces the contents of the box:

a = 2;

Now box "a" contains an integer 2.

Assigning one variable to another makes a copy of the value and puts it in the new box:

int b = a;
b2box.png a2box.png
"b" is a second box, with a copy of integer 2. Box "a" has a separate copy.

Python has "names"

In Python, a "name" or "identifier" is like a parcel tag (or nametag) attached to an object.
a = 1

Here, an integer 1 object has a tag labelled "a".

If we reassign to "a", we just move the tag to another object:

a = 2
a2tag.png 1.png

Now the name "a" is attached to an integer 2 object.

The original integer 1 object no longer has a tag "a". It may live on, but we can't get to it through the name "a". (When an object has no more references or tags, it is removed from memory.)

If we assign one name to another, we're just attaching another nametag to an existing object:

b = a
The name "b" is just a second tag bound to the same object as "a".

Although we commonly refer to "variables" even in Python (because it's common terminology), we really mean "names" or "identifiers". In Python, "variables" are nametags for values, not labelled boxes.

If you get nothing else out of this tutorial, I hope you understand how Python names work. A good understanding is certain to pay dividends, helping you to avoid cases like this:

Default Parameter Values

This is a common mistake that beginners often make. Even more advanced programmers make this mistake if they don't understand Python names.
def bad_append(new_item, a_list=[]):
    return a_list
The problem here is that the default value of a_list, an empty list, is evaluated at function definition time. So every time you call the function, you get the same default value. Try it several times:
>>> print bad_append('one')
>>> print bad_append('two')
['one', 'two']
Lists are a mutable objects; you can change their contents. The correct way to get a default list (or dictionary, or set) is to create it at run time instead, inside the function:
def good_append(new_item, a_list=None):
    if a_list is None:
        a_list = []
    return a_list

% String Formatting

Python's % operator works like C's sprintf function.

Although if you don't know C, that's not very helpful. Basically, you provide a template or format and interpolation values.

In this example, the template contains two conversion specifications: "%s" means "insert a string here", and "%i" means "convert an integer to a string and insert here". "%s" is particularly useful because it uses Python's built-in str() function to to convert any object to a string.

The interpolation values must match the template; we have two values here, a tuple.

name = 'David'
messages = 3
text = ('Hello %s, you have %i messages'
        % (name, messages))
print text


Hello David, you have 3 messages
Details are in the Python Library Reference, section 3.6.2, "String Formatting Operations". Bookmark this one!
If you haven't done it already, go to, download the HTML documentation (in a .zip file or a tarball), and install it on your machine. There's nothing like having the definitive resource at your fingertips.

Advanced % String Formatting

What many people don't realize is that there are other, more flexible ways to do string formatting:

By name with a dictionary:

values = {'name': name, 'messages': messages}
print ('Hello %(name)s, you have %(messages)i '
       'messages' % values)

Here we specify the names of interpolation values, which are looked up in the supplied dictionary.

Notice any redundancy? The names "name" and "messages" are already defined in the local namespace. We can take advantage of this.

By name using the local namespace:

print ('Hello %(name)s, you have %(messages)i '
       'messages' % locals())

The locals() function returns a dictionary of all locally-available names.

This is very powerful. With this, you can do all the string formatting you want without having to worry about matching the interpolation values to the template.

But power can be dangerous. ("With great power comes great responsibility.") If you use the locals() form with an externally-supplied template string, you expose your entire local namespace to the caller. This is just something to keep in mind.

To examine your local namespace:

>>> from pprint import pprint
>>> pprint(locals())
pprint is a very useful module. If you don't know it already, try playing with it. It makes debugging your data structures much easier!

Advanced % String Formatting

The namespace of an object's instance attributes is just a dictionary, self.__dict__.

By name using the instance namespace:

print ("We found %(error_count)d errors"
       % self.__dict__)

Equivalent to, but more flexible than:

print ("We found %d errors"
       % self.error_count)
Note: Class attributes are in the class __dict__. Namespace lookups are actually chained dictionary lookups.

List Comprehensions

List comprehensions ("listcomps" for short) are syntax shortcuts for this general pattern:

The traditional way, with for and if statements:

new_list = []
for item in a_list:
    if condition(item):

As a list comprehension:

new_list = [fn(item) for item in a_list
            if condition(item)]
Listcomps are clear & concise, up to a point. You can have multiple for-loops and if-conditions in a listcomp, but beyond two or three total, or if the conditions are complex, I suggest that regular for loops should be used. Applying the Zen of Python, choose the more readable way.

For example, a list of the squares of 0–9:

>>> [n ** 2 for n in range(10)]
[0, 1, 4, 9, 16, 25, 36, 49, 64, 81]

A list of the squares of odd 0–9:

>>> [n ** 2 for n in range(10) if n % 2]
[1, 9, 25, 49, 81]

Generator Expressions (1)

Let's sum the squares of the numbers up to 100:

As a loop:

total = 0
for num in range(1, 101):
    total += num * num
We can use the sum function to quickly do the work for us, by building the appropriate sequence.

As a list comprehension:

total = sum([num * num for num in range(1, 101)])

As a generator expression:

total = sum(num * num for num in xrange(1, 101))

Generator expressions ("genexps") are just like list comprehensions, except that where listcomps are greedy, generator expressions are lazy. Listcomps compute the entire result list all at once, as a list. Generator expressions compute one value at a time, when needed, as individual values. This is especially useful for long sequences where the computed list is just an intermediate step and not the final result.

In this case, we're only interested in the sum; we don't need the intermediate list of squares. We use xrange for the same reason: it lazily produces values, one at a time.

Generator Expressions (2)

For example, if we were summing the squares of several billion integers, we'd run out of memory with list comprehensions, but generator expressions have no problem. This does take time, though!
total = sum(num * num
            for num in xrange(1, 1000000000))
The difference in syntax is that listcomps have square brackets, but generator expressions don't. Generator expressions sometimes do require enclosing parentheses though, so you should always use them.

Rule of thumb:

  • Use a list comprehension when a computed list is the desired end result.
  • Use a generator expression when the computed list is just an intermediate step.


It's easy to sort a list in Python:

(Note that the list is sorted in-place: the original list is sorted, and the sort method does not return the list or a copy.)

But what if you have a list of data that you need to sort, but it doesn't sort naturally (i.e., sort on the first column, then the second column, etc.)? You may need to sort on the second column first, then the fourth column.

We can use list's built-in sort method with a custom function:

def custom_cmp(item1, item2):
    returm cmp((item1[1], item1[3]),
               (item2[1], item2[3]))

This works, but it's extremely slow for large lists.

Sorting with DSU

DSU = Decorate-Sort-Undecorate

Instead of creating a custom comparison function, we create an auxiliary list that will sort naturally:
# Decorate:
to_sort = [(item[1], item[3], item)
           for item in a_list]

# Sort:

# Undecorate:
a_list = [item[-1] for item in to_sort]

The first line creates a list containing tuples: copies of the sort terms in priority order, followed by the complete data record.

The second line does a native Python sort, which is very fast and efficient.

The third line retrieves the last value from the sorted list. Remember, this last value is the complete data record. We're throwing away the sort terms, which have done their job and are no longer needed.

This is a tradeoff of space and complexity against time. Much simpler and faster, but we do need to duplicate the original list.

In Python 2.4 and above, one can avoid the DSU pattern by using the key argument to the sort() and sorted() builtin functions: simply pass a lambda function which computes the "decoration" part of DSU for the key argument.


We've already seen generator expressions. We can devise our own arbitrarily complex generators, as functions:
def my_range_generator(stop):
    value = 0
    while value < stop:
        yield value
        value += 1

for i in my_range_generator(10):

The yield keyword turns a function into a generator. When you call a generator function, instead of running the code immediately Python returns a generator object, wich is an iterator; it has a next method. for loops just call the next method on the iterator, until a StopIteration exception is raised. You can raise StopIteration explicitly, or implicitly by falling off the end of the generator code as above.

Generators can simplify sequence/iterator handling, because we don't need to build concrete lists; just compute one value at ta time. The generator function maintains state.

This is how a for loop really works. Python looks at the sequence supplied after the in keyword. If it's a simple container (such as a list, tuple, dictionary, set, or user-defined container) Python converts it into an iterator. If it's already an iterator, Python does nothing.

Then Python repeatedly calls the iterator's next method, assigns the return value to the loop counter (i in this case), and executes the indented code. This is repeated over and over, until StopIteration is raised, or a break statement is executed in the code.

A for loop can have an else clause, whose code is executed after the iterator runs dry, but not after a break statement is executed. This distinction allows for some elegant uses. else clauses are not always or often used on for loops, but they can come in handy. Sometimes an else clause perfectly expresses the logic you need.

For example, if we need to check that a condition holds on some item, any item, in a sequence:

for item in sequence:
    if condition(item):
    raise Exception('Condition not satisfied.')

Example Generator

Filter out blank rows from a CSV reader (or items from a list):

def filter_rows(row_iterator):
    for row in row_iterator:
        if row:
            yield row

data_file = open(path, 'rb')
irows = filter_rows(csv.reader(data_file))

Reading Lines From Text/Data Files

datafile = open('datafile')
for line in datafile:

This is possible because files support a next method, as do other iterators: lists, tuples, dictionaries (for their keys), generators.

There is a caveat here: because of the way the buffering is done, you cannot mix .next & .read* methods unless you're using Python 2.5+.


It's easier to ask forgiveness than permission

Look before you leap

Generally EAFP is preferred, but not always.
  • Duck typing

    If it walks like a duck, and talks like a duck, and looks like a duck: it's a duck. (Goose? Close enough.)

  • Exceptions

    Use coercion if an object must be a particular type. If x must be a string for your code to work, why not call


    instead of trying something like

    isinstance(x, str)

EAFP try/except Example

You can wrap exception-prone code in a try/except block to catch the errors, and you will probably end up with a solution that's much more general than if you had tried to anticipate every possibility.
    return str(x)
except TypeError:
Note: Always specify the exceptions to catch. Never use bare except clauses. Bare except clauses will catch unexpected exceptions, making your code exceedingly difficult to debug.


from module import *

You've probably seen this "wild card" form of the import statement. You may even like it. Don't use it.

To paraphrase a well-known exchange:

(Exterior Dagobah, jungle, swamp, and mist.)

LUKE: Is from module import * better than explicit imports?

YODA: No, not better. Quicker, easier, more seductive.

LUKE: But how will I know why explicit imports are better than the wild-card form?

YODA: Know you will when your code you try to read six months from now.

Wild-card imports are from the dark side of Python.


The from module import * wild-card style leads to namespace pollution. You'll get thing in your local namespace that you didn't expect to get. You may see imported names obscuring module-defined local names. You won't be able to figure out where certain names come from. Although a convenient shortcut, this should not be in production code.

Moral: don't use wild-card imports!

It's much better to:

  • reference names through their module (fully qualified identifiers),

  • import a long module using a shorter name (alias; recommended),

  • or explicitly import just the names you need.

Namespace pollution alert!


Reference names through their module (fully qualified identifiers):
import module
Or import a long module using a shorter name (alias):
import long_module_name as mod
Or explicitly import just the names you need:
from module import name
Note that this form doesn't lend itself to use in the interactive interpreter, where you may want to edit and "reload()" a module.

Modules & Scripts

To make a simultaneously importable module and executable script:

if __name__ == '__main__':
    # script code here

When imported, a module's __name__ attribute is set to the module's file name, without ".py". So the code guarded by the if statement above will not run when imported. When executed as a script though, the __name__ attribute is set to "__main__", and the script code will run.

Except for special cases, you shouldn't put any major executable code at the top-level. Put code in functions, classes, methods, and guard it with if __name__ == '__main__'.

Module Structure

"""module docstring"""

# imports
# constants
# exception classes
# interface functions
# classes
# internal functions & classes

def main(...):

if __name__ == '__main__':
    status = main()
This is how a module should be structured.

Command-Line Processing


#!/usr/bin/env python

Module docstring.

import sys
import optparse

def process_command_line(argv):
    Return a 2-tuple: (settings object, args list).
    `argv` is a list of arguments, or `None` for ``sys.argv[1:]``.
    if argv is None:
        argv = sys.argv[1:]

    # initialize the parser object:
    parser = optparse.OptionParser(

    # define options here:
    parser.add_option(      # customized description; put --help last
        '-h', '--help', action='help',
        help='Show this help message and exit.')

    settings, args = parser.parse_args(argv)

    # check number of arguments, verify values, etc.:
    if args:
        parser.error('program takes no command-line arguments; '
                     '"%s" ignored.' % (args,))

    # further process settings & args if necessary

    return settings, args

def main(argv=None):
    settings, args = process_command_line(argv)
    # application code here, like:
    # run(settings, args)
    return 0        # success

if __name__ == '__main__':
    status = main()


  • Used to organize your project.
  • Reduces entries in load-path.
  • Reduces import name conflicts.


import package.module1
from packages.subpackage import module2
from packages.subpackage.module2 import name

In Python 2.5 we now have absolute and relative imports via a future import:

from __future__ import absolute_import

I haven't delved into these myself yet, so we'll conveniently cut this discussion short.

Simple is Better Than Complex

Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it.

—Brian W. Kernighan, co-author of The C Programming Language and the "K" in "AWK"

In other words, keep your programs simple!

Don't reinvent the wheel

Before writing any code,
➔ ➔ ➔ ➔